A3 MAX DTF Printer and Auto Powder Shaker System

نمای کلی/برجسته محصول

شرح دقیق محصول

پرینتر A3 MAX DTF

The A3 MAX DTF Printer is designed for consistent, high-quality Direct-to-Film output. It features a single XP600 Print Head managed by a Hoson Mainboard, providing stable operation and control.

• Precision and Speed: The unit is capable of printing at a resolution of 1440DPI, achieving production speeds of $8\text{pass } 4\text{㎡/h}$بشر

• Ink System: It supports CMYK+WW color configuration using specialized DTF Ink.

• White Ink Management: The printer includes a گردش جوهر سفید system, which actively maintains the white ink suspension to support continuous use.

• Compatibility: Operates with riin/erarip software and is compatible with ویندوز XP/7/8/10/11 operating systems.

The printer supports a maximum media width of 350 میلی متر and is suitable for printing on a wide range of materials, including Textile, Fabric, Leather, Canvas, Cotton, Linen, and Chemical Fiberبشر

دستگاه تکان دهنده پودر A3 DTF

This companion unit automates the powder application and curing stages of the DTF process.

• Operation: It handles a 350 میلی متر feed width, matching the printer’s output. The unit uses an سیستم کنترل هوشمند for managing the process.

• درمان: Heat is supplied by Quartz Heating Tubes through a 400mm Horizontal Drying Tunnel. Heating temperature, powder shaking speed, and sprinkling speed are all adjustableبشر

• کارآیی: ویژگی Automatic Induction and an Automatic Winding Film Method to collect the cured film cleanly, ready for transfer.

مشخصات فنی

پرینتر A3 MAX DTF

دستگاه تکان دهنده پودر A3 DTF

ویژگی ها و مزایا

نحوه استفاده/آموزش

The DTF process involves three primary stages:

1. Design and Print: Prepare the graphic file and send it to the A3 MAX Printer using the RIP software. The printer applies the CMYK color layer followed by the White ink adhesive layer onto the DTF film.

2. Powder and Cure: The wet film enters the A3 Powder Shaking Machine. Powder is applied, excess is removed, and the film passes through the 400mm Heated Tunnel to melt and cure the powder. Temperature and speed must be set according to the specific DTF materials used.

3. Transfer: The cured film is automatically collected. The finished film is then ready to be cut and heat-pressed onto the target garment (Heat press machine required separately).

سؤالات متداول - سوالات متداول

• Q: Which operating systems are compatible with the A3 MAX Printer?

  • الف: The printer is compatible with ویندوز XP/7/8/10/11. Support for the iOS operating system is currently not available.

• Q: Can the curing temperature be precisely controlled?

  • الف: Yes, the A3 Shaker utilizes an سیستم کنترل هوشمند allowing for adjustable heating temperature, shaking, and sprinkling speeds to ensure optimal adhesion.

• س: هدف از سیستم گردش جوهر سفید چیست؟

  • الف: The system continuously stirs the white pigment ink to prevent sedimentation, which is essential for maintaining the consistency of the ink and avoiding print head blockage.

• Q: Is network connectivity supported?

  • الف: Yes, the A3 MAX Printer uses a رابط شبکه for stable data transmission.