Kích thước nhỏ nhà sản xuất máy in phun phẳng
PET Transfer Film: The Complete Guide for DTF Printing (2026)
Phim chuyển thú cưng (often called DTF PET film hoặc DTF transfer film) is the special coated film used as the image carrier in Direct-to-Film (DTF) printing. Instead of printing directly onto fabric, you print your design onto this PET film, apply adhesive powder, cure it, and then heat-press it onto the garment.
If you want consistent DTF results—clean release, strong adhesion, crisp detail, and fewer misprints—choosing the right PET film matters as much as ink and powder.
What Is PET Transfer Film?
PET stands for polyethylene terephthalate, a polyester plastic commonly used in films due to its dimensional stability and durability in many industrial applications.
TRONG in DTF, PET film functions as the transfer medium—the “canvas” where the design is printed before being transferred to fabric.
Why PET Film Needs a Special Coating
DTF PET film isn’t just a plain sheet. It’s typically coated so that:
Ink adheres correctly during printing
Hot-melt powder sticks where it should
The film releases cleanly after heat pressing
Many guides describe DTF PET film as specially coated, often with a frosted/matte printable side và a glossy opposite side (or frosted on both sides for double-sided film).
Một giải pháp sẵn sàng sản xuất được thiết kế cho các cửa hàng cần thông lượng cao hơn và quy trình làm việc tự động hơn.
Một sự lựa chọn thiết thực cho các công ty khởi nghiệp và studio nhỏ muốn có đầu ra đáng tin cậy mà không cần đầu tư quá mức.
Hiệu suất cân bằng cho các cửa hàng in cần tốc độ + đầu ra ổn định trong phạm vi khổ giấy A3.
Được thiết kế dành cho những người dùng ưu tiên chi tiết đẹp, độ chuyển màu mượt mà và cảm giác in cao cấp.
Mẫu A3 đáng tin cậy cho sản lượng ổn định hàng ngày, phổ biến trong hoạt động sản xuất của doanh nghiệp nhỏ.
Mô hình cấp nhập cảnh nhỏ gọn hoàn hảo cho các công ty khởi nghiệp và sản xuất hàng loạt nhỏ.
Mô hình A4 nâng cao với hiệu suất mực được cải thiện để sản xuất quy mô nhỏ hàng ngày.
Máy in định dạng A3 với bo mạch chủ R1390 đáng tin cậy để sản xuất trung bình.
Mô hình A3 tiêu chuẩn với bể mực 250ml cho hoạt động hàng ngày nhất quán.
Mô hình đầu in L1800 cung cấp tái tạo màu sắc vượt trội cho các thiết kế chi tiết.
Máy in A3 Max DTF
Mô hình A3 hiệu suất cao với đầu in DX7 cho kết quả chuyên nghiệp.
Mô hình A3 hiệu suất cao với đầu in XP600 cho kết quả chuyên nghiệp.
Máy in định dạng rộng công nghiệp với đầu XP600 kép (chiều rộng 620mm).
Mô hình công nghiệp tốc độ cao với đầu i1600 kép (đầu ra 10㎡/h).
Máy in công nghiệp cao cấp với đầu i3200 kép cho năng suất tối đa.
PET Transfer Film in the DTF Workflow (Step-by-Step)
A standard DTF workflow looks like this:
Prepare artwork in RIP
Print on DTF PET film
Apply adhesive powder
Heat/cure the powder so the adhesive activates
Heat press the transfer onto fabric
Peel the film according to film type (hot/cold/instant peel)
Types of DTF PET Transfer Film
1) Hot Peel vs Cold Peel vs Instant Peel
DTF films are commonly sold as:
Vỏ nóng (peel soon after pressing)
Vỏ lạnh (wait until it cools before peeling)
Instant/warm peel (varies by supplier—typically peel after a short wait)
Film makers and guides commonly categorize DTF film this way because peel behavior affects workflow speed, release quality, and repeatability.
Practical rule:
If you run production and want speed → many shops prefer hot/instant systems
If you want a more forgiving release process → cold peel systems are common
(Always follow your film supplier’s press + peel instructions; “hot peel” between brands can behave differently.)
2) Single-Sided vs Double-Sided DTF Film
Single-sided film typically has a printable coating on one side (often frosted/matte) and a smoother/glossier back side.
Double-sided film typically has a frosted/matte texture on both sides—not because you print both sides, but to improve feeding stability and reduce slipping/static-related issues.
Many suppliers and guides state that double-sided film can improve handling (less slipping) and can reduce static problems that attract powder dust.
When to choose which:
Single-sided: cost-effective, works well on many setups
Double-sided: better for higher stability feeding, some printers that struggle with glossy backs, and shops fighting static/powder dust
3) Matte/Frosted vs Glossy
A very common DTF PET film structure is:
Frosted/matte side = printable side
Glossy side = non-print side
(or both sides frosted for double-sided film)
This matters because printing on the wrong side can cause:
poor ink adhesion
powder not sticking correctly
muddy detail or release failures
PET Transfer Film Thickness (75 Micron vs 100 Micron)
A very common spec range for DTF PET film is 75–100 microns (µm), seen across multiple product listings and buying guides.
Choosing thickness (shop logic)
75 µm: more flexible, often feeds easily, popular for general use
100 µm: stiffer, can feel more stable in some workflows, sometimes preferred for larger designs/roll workflows
Your “best thickness” depends on your printer’s feeding behavior, your environment (static/humidity), and whether you’re running sheets or rolls.
Sheet vs Roll PET Film
Sheets (A4/A3, etc.) are convenient for entry-level workflows and small jobs
Rolls (30/60cm widths, etc.) are preferred for higher throughput and automated cutting/feeding setups
If you’re scaling, roll film usually delivers better consistency and lower handling time—assuming your printer and take-up are dialed in.
How to Identify the Printable Side of PET Film
Most DTF films have a coated side intended for printing. Many guides summarize it as: one coated side and one uncoated side, and the coated side is the correct print side.
Quick shop checks:
Printable side is usually matte/frosted (slightly textured)
Non-print side is often glossy/smoother (single-sided films)
(Some films can be subtle—always label rolls once you confirm the print side.)
Compatibility: Film + Ink + Powder Must Match
DTF relies on three consumable systems working together:
mực DTF adheres to the film coating
bột bonds to the printed ink layer
Curing + pressing activate and bond the transfer to fabric
If your film is mismatched to your powder/ink, you’ll see symptoms like:
powder not sticking evenly
grainy edges or pinholes
weak adhesion after washing
film not releasing cleanly
Storage & Handling: How to Protect PET Film Quality
DTF films and transfers are sensitive to heat, humidity, dust, and static. Multiple guides recommend storing film in a cool, dry, dark environment and controlling humidity to reduce defects.
Common storage targets (seen in industry guides):
temperature around 18–24°C Và 40–60% RH for film storage
keep sealed in original packaging; reduce dust and static
Handling tips that reduce waste:
Store rolls upright and sealed to prevent warping and contamination
Avoid direct sunlight/UV exposure for long periods (helps preserve coatings)
Use FIFO (first-in-first-out) so older rolls get used first
Troubleshooting: Common PET Film Problems (and What They Usually Mean)
1) Powder sticks everywhere (dusty background)
Nguyên nhân có thể
static charge on film
environment too dry
using film/powder combo that’s too “grabby”
Fixes
consider double-sided/anti-static film options (many products market anti-static properties)
increase humidity slightly (within safe limits) and reduce dust
2) Ink beads up or looks inconsistent
Nguyên nhân có thể
printing on the wrong side
contaminated film surface (fingerprints, oil)
Fixes
confirm you print on the coated/matte side
handle film by edges; keep work surface clean
3) Film won’t release cleanly (peeling pulls the design)
Nguyên nhân có thể
wrong peel timing (hot vs cold peel mismatch)
insufficient cure or press settings not matched to film type
Fixes
follow your film’s peel type (hot/cold/instant)
verify your cure/press steps align with the workflow described by DTF process guides
4) Curling or wavy film / feeding issues
Nguyên nhân có thể
poor storage (humidity/heat swings)
film tension/alignment issues
low-quality film thickness tolerance
Fixes
store film in controlled temp/humidity ranges
consider thicker film or higher stability film for your setup
Buying Checklist: How to Choose the Right PET Transfer Film
When comparing PET films, ask for these details:
Peel type: hot peel / cold peel / instant peel
Coating style: single-sided vs double-sided (feeding stability + static control)
Độ dày: commonly 75–100 µm; match to your printer handling
Finish: matte/frosted print side, glossy back (or matte both sides)
Roll width & core size: match your printer/take-up system
Compatibility notes: confirm the film is intended for your ink/powder system (ask supplier for recommended settings)
FAQ: PET Transfer Film
What does PET stand for?
PET is polyethylene terephthalate, a polyester plastic widely used in films.
Is “PET transfer film” the same as “DTF film”?
In most garment-printing contexts, yes—DTF film is commonly described as PET film with a special coating for DTF transfers.
Which side of PET film do you print on?
Typically the coated/matte (frosted) side is the printable side.
What thickness is best: 75 micron or 100 micron?
Both are widely used; many buying guides and product specs list 75–100 µm as common ranges. Pick based on feeding stability, shop humidity/static, and whether you run sheets or rolls.
Does double-sided film mean I can print both sides?
Usually no. Double-sided typically means both sides have a matte/frosted texture to improve stability and reduce slipping—not that both sides are meant for printing.
Phần kết luận
A high-quality Phim chuyển thú cưng is the foundation of reliable DTF production. Look for the right peel typeThì coating style (single vs double-sided), Và thickness (often 75–100 µm), store it properly, and your print quality and yield will improve immediately.
Có thể bạn cũng thích
Bản quyền 2020 © Erasmart. | SITEMAP
Yêu cầu báo giá
Chỉ cần cung cấp một vài chi tiết và chúng tôi sẽ giúp bạn nhận được báo giá nhanh!