A3 MAX DTF Printer and Auto Powder Shaker System

產品概述/亮點

詳細的產品描述

A3 MAX DTF 打印機

The A3 MAX DTF Printer is designed for consistent, high-quality Direct-to-Film output. It features a single XP600 Print Head managed by a Hoson Mainboard, providing stable operation and control.

• Precision and Speed: The unit is capable of printing at a resolution of 1440dpi, achieving production speeds of $8\text{pass } 4\text{㎡/h}$。

• Ink System: It supports CMYK+WW color configuration using specialized DTF Ink.

• White Ink Management: The printer includes a 白色墨水循環 system, which actively maintains the white ink suspension to support continuous use.

• Compatibility: Operates with riin/erarip software and is compatible with Windows XP/7/8/10/11 operating systems.

The printer supports a maximum media width of 350mm and is suitable for printing on a wide range of materials, including Textile, Fabric, Leather, Canvas, Cotton, Linen, and Chemical Fiber。

A3 DTF Powder Shaking Machine

This companion unit automates the powder application and curing stages of the DTF process.

• Operation: It handles a 350mm feed width, matching the printer’s output. The unit uses an Intelligent Control System for managing the process.

• 養護： Heat is supplied by Quartz Heating Tubes through a 400mm Horizontal Drying Tunnel. Heating temperature, powder shaking speed, and sprinkling speed are all adjustable。

• 效率： 特徵 Automatic Induction and an Automatic Winding Film Method to collect the cured film cleanly, ready for transfer.

技術規格

A3 MAX DTF 打印機

A3 DTF Powder Shaking Machine

Features & Benefits

如何使用/教程

The DTF process involves three primary stages:

1. Design and Print: Prepare the graphic file and send it to the A3 MAX Printer using the RIP software. The printer applies the CMYK color layer followed by the White ink adhesive layer onto the DTF film.

2. Powder and Cure: The wet film enters the A3 Powder Shaking Machine. Powder is applied, excess is removed, and the film passes through the 400mm Heated Tunnel to melt and cure the powder. Temperature and speed must be set according to the specific DTF materials used.

3. Transfer: The cured film is automatically collected. The finished film is then ready to be cut and heat-pressed onto the target garment (Heat press machine required separately).

常見問題解答 - 常見問題

• Q: Which operating systems are compatible with the A3 MAX Printer?

  • 一個： The printer is compatible with Windows XP/7/8/10/11. Support for the iOS operating system is currently not available.

• Q: Can the curing temperature be precisely controlled?

  • 一個： Yes, the A3 Shaker utilizes an Intelligent Control System allowing for adjustable heating temperature, shaking, and sprinkling speeds to ensure optimal adhesion.

• Q: What is the purpose of the White Ink Circulation system?

  • 一個： The system continuously stirs the white pigment ink to prevent sedimentation, which is essential for maintaining the consistency of the ink and avoiding print head blockage.

• Q: Is network connectivity supported?

  • 一個： Yes, the A3 MAX Printer uses a 網絡接口 for stable data transmission.